1 smd s ocket and pin connectors , parallel mount 1. de scription and general feature s g eneral de scription low profle surface mount socket and pin connectors for parallel mounting. the number of contacts for each connector is from 2 to 10 poles. this pair of connectors is an optimal solution to connect and stack printed circuit boards. both carriers are made of high tem - perature plastic and maintain the contacts in place during the soldering operation. car - rier is used as a pick & place cap allowing automatic positioning on the pcb. cap is not foreseen to be removed after soldering. both connectors can be supplied either in bulk or in a tape & reel packaging. challenge was to develop a connector that will be soldered on a minimum pcb surface. ad vantage s main advantage of this connector is its small size and it can be soldered from under - neath. optimal connection between two pcb. reliable technology using our becu clip with 500 cycles guaranteed. the maximum current rating is 3 amps. a pplications pair of connectors (socket connector & pin header) has originally been designed and de - veloped for a connection between two led lighting strips. each strip is equipped on one end with a 2-way socket connector and on the other end with a pin header. led lighting strips are stackable. for this application, a connector with smd solder tails at the back of the connector was not possible due to space limitation. this type of connectors can of course be used in many other applications where a board-to-board connection is needed. o ptional versions current version can be modifed to meet with your specifc requirements. plastic carrier and contacts can easily be adapted to ft your application. prod uct inform ation ip 0001.00 swiss world connects
2 environtm ental operating temperature -55 ... + 125c climatic category (iec) 55 / 125 / 21 solderability 245c, 5s resistance to soldering heat 260c, 10s material s contact body (socket) machined brass c36000, tin plating 5 m sn over 2.5 m ni contact body (pin) machined brass c36000, gold pla - ting 0.25 m sn over 2.5 m ni contact spring becu c17200, gold plated (gold fash or 0.75 m) over ni insulator glass flled polyester pct-gf30- fr, self-extinguishing ul94v-0, colour black mechanical c haracteris tics mating pins (socket) diameter 0.70 to 0.90 mm connecting pin 0.76 mm mechanical life min. 500 cycles coplanarity smd terminations max. 0.1 mm e lectrical c haracteris tics operating voltage 100 v rms / 150 v dc rated current 3a contact resistance max 10 m? insulation resistance min. 10'000 m ? at 500 v ac dielectric strength 500 v rms air and creepage distances 0.70 mm capacitance 1 pf max. 2. t echnical specifications 3. ordering i nform ation 4. technical dra wings dimensions , order code numbers socket connector 8fm-pp-0nnn -02-278 contact plating code -pp-: 78-body: tin clip: gold fash 38-body: tin clip: 0.75 m gold code for number of contacts C0 nnn-: 2 to 10 contacts pin connector 8mm-11-0nnn -02-279 contact plating code -11-: body and clip: 0.25 m gold code for number of contacts C0 nnn-: 2 to 10 contacts p ackaging i nform ation available in bulk or in tape & reel packaging. socket conector 8fm-pp-0 nnn -02-278 pin conector 8mm-11-0 nnn -02-279
|
